Uvitron has built UV curing systems in the U.S. for over thirty years. Design, assembly, and support all happen in-house. The systems run reliably, last longer, and are easy to maintain. If something goes wrong, you get real support fast.
Uvitron International
-
Uvitron PortaRay
The PortaRay is a compact, high-intensity UV flood curing system engineered for mobility, precision, and consistent output. It delivers uniform UV exposure across a 5 x 5 inch curing area using a long-life arc lamp, available in 400 or 600 watt configurations. Users can choose between a parabolic reflector for wide-area coverage or a focused reflector for concentrated intensity. Both reflector options are field-replaceable and optimized for specific curing geometries and energy densities. The system’s internal power supply regulates lamp output in real time, minimizing drift and ensuring consistent irradiance throughout extended use. A built-in standby mode lowers lamp power during idle periods, significantly reducing thermal load and extending overall lamp life. With a warm-up time of under 60 seconds, the PortaRay is ready to operate quickly, improving throughput in short-run or on-demand processes. Weighing just 3 pounds, the PortaRay is designed for maximum integration flexibility. It can be handheld for field or repair work, or securely mounted to fixtures, stands, conveyors, or robotic arms for in-line use. All components are self-contained within the lamp head. There is no separate controller or ballast to install, wire, or calibrate. Simply connect to AC power and begin operation. Forced-air cooling maintains internal temperatures within safe operating limits, enabling continuous-duty cycles in demanding environments. The system is suited for lab-scale development, high-mix low-volume production, or field-service applications where full-size systems are impractical. Its compact form factor and industrial-grade output make it ideal for curing adhesives, coatings, or inks where space, portability, or rapid setup is required. Note: This configuration includes the PortaRay lamp head only. The optional carrying case is sold separately.
$1,799.00 - $1,999.00
-
Uvitron SkyBeam
The SkyBeam is a high-intensity LED spot curing system engineered for precision curing of UV adhesives, coatings, and resins. Delivering up to 14,000 mW/cm² at the tip, the SkyBeam supports fast cure times with minimal heat transfer to the workpiece, making it ideal for thermally sensitive substrates and components. Available in 365, 385, 395, and 405 nm wavelengths, the SkyBeam offers compatibility with a wide range of UV chemistries used in electronics, medical devices, optics, and industrial assembly. Designed for both manual and automated workflows, the SkyBeam supports up to four independent LED light guides. Each channel features dedicated intensity control and exposure timing, allowing simultaneous or staggered curing across multiple parts. Light guides connect through a locking interface to ensure stable optical coupling and are built with high-flex, robot-compatible cables tested for motion applications. LED heads are user-replaceable and rated for long operating life, reducing maintenance downtime and operating costs. The SkyBeam is controlled via front-panel interface or rear I/O, with TTL logic and RS232 connectivity for integration into PC-based systems, PLCs, or automated assembly lines. Built-in thermal sensors monitor internal temperature and automatically reduce drive current to prevent overheating, protecting the LEDs and extending the life of the light guides. A compact footprint and lightweight enclosure allow easy installation in space-constrained environments, whether mounted on a bench, inside an enclosure, or as part of a robotic platform. The SkyBeam is shipped ready to operate, with no external drivers or cooling hardware required. It combines solid-state reliability, tight output control, and compact industrial design for dependable UV LED curing across production environments.
$2,899.00 - $3,999.00
-
Uvitron SkyRay
The SkyRay is Uvitron’s flagship all-in-one LED flood curing system, engineered for manufacturers moving away from arc lamp limitations. It delivers up to 800 watts of solid-state UV output from a single compact head with no external drivers, shutters, or cooling equipment required. Designed for fast deployment, the SkyRay connects directly to standard AC power and reaches curing-ready output in seconds. The system produces uniform irradiance over a 5 x 5 inch area, suitable for high-speed curing of UV adhesives, inks, or coatings. Available wavelengths include 365, 385, 395, and 405 nm, allowing precise alignment with material absorption spectra. Output intensity is digitally adjustable in 1 percent increments from 10 to 100 percent, making it suitable for both sensitive chemistries and high-throughput applications. A front-mounted LCD interface provides direct control over exposure time, output level, and status monitoring. Internal power regulation ensures consistent intensity regardless of fluctuations in line voltage. The SkyRay includes a variable-speed cooling fan and removable filter to manage internal temperature, reduce contamination risk, and extend the life of the LED array and electronics. The enclosure includes integrated handles and a compact footprint for quick repositioning or fixed mounting. Password protection is available to lock critical settings in regulated environments. Multiple SkyRay units can be installed in parallel to scale coverage for larger substrates or multi-zone curing without the need for external synchronization or added control infrastructure. Choose the lamp head only if integrating into an existing shielding or automated system. For operator-facing environments, select a configuration with the compatible curing chamber to ensure proper light containment and compliance with safety standards.
$4,999.00 - $7,299.00
-
Uvitron SkyWand
The SkyWand is a compact, handheld UV LED curing lamp designed for mobile, point-of-use applications where precision and portability are critical. It delivers high-intensity UV output with no warm-up time, no external power supply, and no cables, making it ideal for quick repairs, spot bonding, or field-based tasks that demand flexibility without sacrificing performance. Compatible with 365, 385, 395, and 405 nm wavelengths, the SkyWand supports a wide range of UV-curable adhesives, inks, and coatings. High-output LEDs provide instant, consistent irradiance with no flicker or degradation during use. A 15 mm collimating lens is pre-installed for focused curing, and optional lenses are available for narrower or wider beam profiles depending on the application. The SkyWand is powered by a rechargeable lithium-ion battery that delivers up to 2 hours of continuous runtime per charge. The activation switch is integrated directly into the lamp head, allowing for one-handed operation. The lightweight, ergonomic design minimizes operator fatigue during extended use and enables access to hard-to-reach areas in assemblies, enclosures, or on-site repairs. The unit is fully self-contained and shipped ready for immediate deployment. It requires no setup, calibration, or external components. Whether used on the production floor, in a mobile service environment, or as a bench-side tool for small-scale curing, the SkyWand provides reliable output and industrial-grade performance in a portable format. For users needing fast, flexible UV curing at the point of application, the SkyWand is the go-to solution.
$835.00 $779.00
-
Uvitron SunRay
The SunRay is Uvitron’s simplest UV flood curing system, designed for direct, no-frills operation. It delivers uniform UV output across an 8 x 6 inch area using either a 400 or 600 watt arc lamp. There are no displays, no programmable functions, and no mechanical shutters, just a compact, self-contained curing head engineered for reliable performance. Power is internally regulated to maintain consistent irradiance during use. A rocker switch toggles between full output and standby mode, reducing thermal load and extending lamp life during idle periods. An integrated hour meter tracks lamp runtime for proactive maintenance and replacement. The SunRay reaches operating conditions quickly and maintains stable UV output throughout its duty cycle. The unit’s low-profile, lightweight design allows for flexible installation in benchtop, rack-mounted, or enclosed configurations. For users integrating into existing shielding or automation systems, the standalone lamp head provides a cost-effective solution. For environments requiring light containment and operator safety, a complete configuration with Uvitron’s curing chamber is recommended. The 600 watt model is ideal for thicker coatings, higher-speed processes, or materials requiring elevated energy exposure. The SunRay is intended for production setups where simplicity, consistency, and footprint matter more than programmability. It is a solid, entry-level system for curing adhesives, inks, or coatings in controlled environments. SpotCraft Tip: If you require programmable controls, built-in timers, or shielding, consider upgrading to the IntelliRay. We carry the SunRay for customers who need straightforward UV curing without the cost or complexity of advanced features.
$2,499.00 - $3,999.00
-
Uvitron SunSpot 2
The SunSpot 2 is one of the most widely used UV spot curing systems in the industry, known for its high-intensity output, compact design, and integration flexibility. Capable of delivering over 30 W/cm² at the light guide tip, it supports rapid curing of UV adhesives, coatings, and encapsulants, including formulations with high filler content or reduced optical clarity. This level of irradiance ensures complete polymerization even in challenging geometries or through light-absorbing materials. The system operates with precision across both R&D and production environments. Its microprocessor-regulated power supply maintains stable UV output over extended duty cycles, eliminating the drift and degradation common in analog systems. This stability is critical for repeatable curing performance, particularly in applications with tight process control requirements such as medical device assembly, electronics manufacturing, and microfluidic bonding. The SunSpot 2 supports both single-pole and multi-pole liquid or quartz light guides, allowing users to cure one or multiple points simultaneously. Light guides are easily swapped, enabling quick reconfiguration between tasks without interrupting workflow. Its optical interface ensures maximum transmission efficiency with minimal energy loss between the lamp and the guide, preserving intensity at the cure site. The system’s built-in cooling and compact form factor eliminate the need for bulky external chillers or power boxes. It plugs in and runs with minimal setup, reducing installation time and simplifying integration into existing workstations or automation cells. Control options include manual intensity adjustment via the front panel, foot pedal activation, and remote I/O for PLC-driven automation. With a long lamp life, low maintenance requirements, and consistent high output, the SunSpot 2 delivers reliable curing performance over thousands of hours. Its durability and output stability make it a trusted platform across cleanrooms, production floors, and laboratories worldwide.
$4,220.00 $3,999.00
You have seen 18 out of 18 products